Introduction and Rules - Old Version

Discussion about the values for Type of test, Subtype of test and Regulation
Locked
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Introduction and Rules - Old Version

Post by derpmann »

In the draft version of MME 2.0 three new tables for the specification of a test are introduced in RED A
see Final Version documents at http://www.iso-mme.org/forum/viewtopic.php?f=35&t=54

Independent from the MME 2.0 it is possible to use this tables as a first approach if they are agreed between the exchanging partners.

The three specification items are hierarchically ordered:
  1. Type of the test
    highest level with the following possible values:
    • Airbag Test
    • Bumper Test
    • Car To Barrier Impact
    • Car To Car Impact
    • Component Test
    • Door Intrusion
    • Drop Test
    • Dummy Certification E2
    • Dummy Certification ER
    • Dummy Certification H3
    • Dummy Certification HF
    • Dummy Certification HM
    • Dummy Certification S2
    • Dummy Certification WS
    • Dummy Certification Y2
    • Dummy Certification Y6
    • Dummy Certification Y7
    • Frontal Impact
    • Frontal Sled Test
    • Misuse Test
    • Other
    • Pedestrian Protection
    • Pendulum Test
    • Pressure Test
    • Rear Impact
    • Rear Sled Test
    • Rollover Leftside
    • Rollover Rightside
    • Roof Crush
    • Side Impact Leftside
    • Side Impact Rightside
    • Sled Test Leftside
    • Sled Test Rightside
    • Towing Test
  2. Subtype of the Test
    Dependent on the Type of test a list of possible values is allowed.
    For detailed information please see the other topics in this subforum.

  3. Regulation resp. list of regulations

    The rule for the regulation syntax in MME 2.0 RED A is:
    The regulation can be a reference to a national standard or to a consumer organisation. A consumer test is sometimes followed by the start year of validity. National standards are normally followed by one or two numbers. If a number represents a year it has to be a four digit notation YYYY. In the case of two numbers they have to be separated by ’/ ‘ (ASCII 47) and the year is the second value. Often a test is according to multiple regulations. Therefore a list of valid regulations separated by comma (ASCII 44) is possible
Possible values for the Regulation-Core are:

Code: Select all

ADR        National Standard of Australia
AIS        National Standard of India
CMVSS      National Standard of Canada
CONTRAN    National Standard of Brazil
ECE-R      Standard of the UN
EG         Standard of European Union
FMVSS      National Standard of US
GB         National Standards of the People’s Republic of China
GTR        Worldwide Standard of the UN
KMVSS      National Standard of South Korea
TRIAS      National Standard of Japan
ADAC       German Motorcar Club Testprocedure
ANCAP      Australian New Car Assessment Program
AseanCAP   Asean New Car Assessment Program
CNCAP      China New Car Assessment Program                
EuroNCAP   European New Car Assessment Program
IIHS       Insurance Institute For Highway Safety
ISO        International Organization for Standardization Standard
JNCAP      Japan New Car Assessment Program
KNCAP      Korean New Car Assessment Program
LatinNCAP  Latin New Car Assessment Program
RCAR       Research Council for Automobile Repairs Testprocedure
SAE        Society of Automotive Engineers Standard
USNCAP     US New Car Assessment Program
Internal   Company specific regulation
Other      None of the listed standards or consumer tests
This would lead to the following examples:
  • ISO6487/1987,SAEJ211/1995
  • EuroNCAP/2015
  • USNCAP/2011
  • ECE-R95/2011
  • FMVSS202a
  • EG78/2009
  • AIS099/2008
  • TRIAS47-3/2003
Locked

Return to “Testtypes, Subtypes and Regulations”