Corrections of the ISO TS 13499 - MME 2.0 maindocument

that which may, or may not, be in version 2.0!
Post Reply
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Corrections of the ISO TS 13499 - MME 2.0 maindocument

Post by derpmann »

Dear colleagues,
please find attached the comments and change requests for the MME 2.0 main document.
ISO_TS13499_German_Comments_20170503.doc
(39.5 KiB) Downloaded 479 times
Besides editorial comments the update affects the static data.
It should be allowed to use more than one static measurement data files.
In consequence the static subdirectory should mandatory contain the static data information file.

This changes are accepted by the WG3 at the autumn meeting 2017 in Troy.

Best regards
Peter
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: Corrections of the ISO TS 13499 - MME 2.0 maindocument

Post by derpmann »

Dear colleagues,
here you will find the results of the DTS ballot on ISO 13499:
ISO-TC22-SC36-WG3_N0910_Results_of_DTS_ballot_on_ISO_13499.pdf
results of the ballot
(88.9 KiB) Downloaded 447 times
This comments were discussed at the MME-TaskForce meeting 13.06.2018 with the following decisions:
  • US002: the document has to be updated with the proposed change
  • US003: I will create a short document of ‚essential changes‘ from Version 1.x to Version 2 and post it here;
    after 2-3 weeks for comments this document will be send to the WG3
  • US004: the document has to be updated with the proposed change
Best regards
Peter
Post Reply

Return to “MME 2.0 discussion”