Channelcodes for Q10 Dummy

Suggestions for new codes
Locked
gieschef
Posts: 12
Joined: Thu Dec 16, 2010 2:04 pm
Company: ZF Automotive Germany GmbH
Location: ZF Automotive Germany GmbH Alfdorf/Germany

Channelcodes for Q10 Dummy

Post by gieschef »

Hello,

are there already any proposals for channelcodes to use for Q10 Dummy ?
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Channelcodes for Q10 Dummy

Post by DiVe »

Dear Mr. "Gieschef" (Sorry! I am not sure if this is your true name.),

actually we are delayed with the Q-Dummy coding. We started this issue a while ago, but are actually occupied
by other tasks so we postponed the discussion. Especially the Q10 is actually missing. But I suggest that the coding will be very close to the other Q-Dummies. Please find attached the list of codes under discussion.
20110711_QDummies_Coding.pdf
(76.36 KiB) Downloaded 678 times
If you find some codes are missing please contribute this information to us.

The codes are preliminary. So be prepared that there might be changes later. But if you are currently involved in testing with this dummy I would appreciate if you can verify the channels and the coding from your point of view.

I hopefully could supply a proposal for the Q10 in the next two weeks.

For the official database 1.6 / 2.0 we planned to have all the Q-Dummies codes implemented.

Kind regards,
Dirk Vetter
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Channelcodes for Q10 Dummy

Post by DiVe »

Dear colleagues,
I have prepared a updated proposal for the Q-Dummy coding, including the Q10 dummy.
20111212_QDummies_Coding.pdf
(84.88 KiB) Downloaded 615 times
Please review. Comments and additions are welcome.

Kind regards,
Dirk Vetter
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Channelcodes for Q10 Dummy

Post by DiVe »

.... please respect status update at:
http://www.iso-mme.org/forum/viewtopic.php?f=89&t=267
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: Channelcodes for Q10 Dummy

Post by derpmann »

for the figure please see http://www.iso-mme.org/forum/viewtopic.php?f=89&t=391

Regards

Peter
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Channelcodes for Q10 Dummy

Post by DiVe »

Please find the final status of the Q-Dummy coding and Q10 (QA) coding at:
http://www.iso-mme.org/forum/viewforum.php?f=89
Locked

Return to “Additional codes”