ISO Names for 3rd degree in Seat Belt Force

Suggestions for new codes
Locked
Josep Maria Pons
Posts: 3
Joined: Fri Nov 09, 2007 1:17 pm
Company: IDIADA AT
Location: IDIADA AT, Santa Oliva, Spain
Contact:

ISO Names for 3rd degree in Seat Belt Force

Post by Josep Maria Pons »

Hello all,

we have been discussing about 3rd degree polynomial calibration in Seat Belt Forces data.

As a reference we got the Chest Displacement with 3rd degree calibration.
In that case the ISO-NAMEs where (for instance):
??CHST0000H3DSX? (First degree)
??CHST0003H3DSX? (Third degree)

So, in case of Seat Belt Forces, would be correct the following ISO-NAMES?
??SEBE0000B3FO0? (First degree)
??SEBE0003B3FO0? (Third degree)

Moreover, what about the case of the ISO-NAMES with the Fine Position3 not available?
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: ISO Names for 3rd degree in Seat Belt Force

Post by derpmann »

Hello Josep Maria,

the MME TaskForce agrees with your proposal to use 03 for the polynomial calibrated channels.

We don't see a conflict in the FineLocation2 for seat belt forces in the moment.

Regards

Peter
Locked

Return to “Additional codes”