New MainLocations for Rollover and Barrier Tests

Suggestions for new codes
Locked
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

New MainLocations for Rollover and Barrier Tests

Post by derpmann »

Dear colleagues,
for the filmanalysis measurement and simulation of rollover tests we need two new MainLocations
which describe parts of the testrig environment:
  • RAMP - ramp - part with variable heights or angles and orientations to turn the vehicle
    GRND - ground - surface/plane of the sand bed or embankment
For barrier tests we need to distinguish between the stable and the deformable parts of the test object:
  • DEFO - deformable element - defo element mounted at a fixed or movable barrier
Best regards

Peter Derpmann-Hagenström
Attachments
MainLocation_Defoelement.jpg
MainLocation_Defoelement.jpg (8.27 KiB) Viewed 4331 times
MainLocations_Rollover.jpg
MainLocations_Rollover.jpg (17.91 KiB) Viewed 4331 times
User avatar
Admin
Site Admin
Posts: 69
Joined: Thu Jan 01, 1970 12:33 am

Re: New MainLocations for Rollover and Barrier Tests

Post by Admin »

Discussed 2014-04-02: in principle, this is agreed, subject to a suitable figure.
Forum Admin
Locked

Return to “Additional codes”