Not enough seating locations in ISO MME

Suggestions for new codes
Locked
sknack
Posts: 2
Joined: Wed Sep 22, 2010 8:19 am
Company: Ford Motor Company

Not enough seating locations in ISO MME

Post by sknack »

Vehicles with 6 seat rows each up to 4 seats per row are used for full-vehicle crash tests and
seatbelt anchorage pull tests.

What are possibilities to name the seating positions in ISO MME?

Please send proposals.
Ford Transit.jpg
Ford Transit.jpg (223.29 KiB) Viewed 6243 times
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Not enough seating locations in ISO MME

Post by DiVe »

Dear Stefan,
a similar issue has been discussed in:
"Zone model problem"
http://www.iso-mme.org/forum/viewtopic.php?f=38&t=292

Would this be a solution for your issue?

Bye,
Dirk
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Not enough seating locations in ISO MME

Post by DiVe »

Dear Stefan,
please find attached a sketch with a possible solution for your special application.
Zone/Seating Codes Example (special Application)
Zone/Seating Codes Example (special Application)
Seating-Codes.png (11.06 KiB) Viewed 6233 times
Please respect that the typical zone model for vehicle measurements (passenger car)
might be useful for general vehicle structure measurements (11APIL...).
But If you intend to measure a dummy on the seat or at the structure close to the seats
it might be advisable to use the more precise "1"-"J" codes in the ISO[2] position of the coding:
e.g. for position "D": 1DHEAD0000H3ACXP, 1DSEATLELO00ACXP, 1DSEBE0000B5FO0P,....

Bye,
Dirk

Item closed
Attachments
Seating_Ford-Bus.ppt
Same information as vector format
(563.5 KiB) Downloaded 494 times
User avatar
Admin
Site Admin
Posts: 69
Joined: Thu Jan 01, 1970 12:33 am

Re: Not enough seating locations in ISO MME

Post by Admin »

Item closed by on-line meeting 28 October 2014
Forum Admin
Locked

Return to “Additional codes”