New Channelcode for polynomial calibrated beltforce transduc

Suggestions for new codes
Locked
gieschef
Posts: 12
Joined: Thu Dec 16, 2010 2:04 pm
Company: ZF Automotive Germany GmbH
Location: ZF Automotive Germany GmbH Alfdorf/Germany

New Channelcode for polynomial calibrated beltforce transduc

Post by gieschef »

According to the new ISO 17242 it is proposed, at least an Option, to use a cubic polynom as transfer function in alternative to the linear sensitivity for beltforce transducers.

In order to have an opportunity to distinguish the resulting channels easily we would suggest to handle this similar to the chest deflection potentiometer in H3 Dummy.
By using the '03' in Finelocation 2 for the beltforce channels that have been measured with polynomial calibrated transducers the risk of not recognizing the different calibration method when evaluating the channel is minimized.
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: New Channelcode for polynomial calibrated beltforce tran

Post by derpmann »

Proposal to use '03' for the FineLocation 2 for the polynomial calibrated belt force channels accepted by the MME TaskForce.

Item closed
User avatar
Admin
Site Admin
Posts: 69
Joined: Thu Jan 01, 1970 12:33 am

Re: New Channelcode for polynomial calibrated beltforce tran

Post by Admin »

item closed by on-line meeting 28 October 2014
Forum Admin
Locked

Return to “Additional codes”