Arbitrary Direction Code

Suggestions for new codes
Locked
shaight
Posts: 2
Joined: Tue Nov 20, 2018 9:54 pm
Company: Tesla Inc.

Arbitrary Direction Code

Post by shaight »

Hello group,

I am looking for a Code Position 15 for a sensor that is measuring at an arbitrary angle. For example, if a vehicle sensor is measuring at 45 degrees, or 60 degrees from the longitudinal. Currently there is code for this. Code 0 is "Without", which doesn't really apply here and Code R is for "Resultant" which is for calculated channels? One suggestion could be "V" for any arbitrary vector angle? I am open for suggestions.

Thank you.
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Arbitrary Direction Code

Post by DiVe »

Hello,

in my opinion the "0" code might apply here still. Even if the wording "Without" is not the best naming for it, the "0" code is used if no specific direction is addressed.
A better longname for “0” might be: "no specific direction".

For example a belt force will be coded with "0" direction or often the voltage and event channels.

My you can describe your application that has a need for this coding?
So we can think about it or provide information which codes are used by other labs.

Kind regards,
Dirk

2019-01-22 22_00_28-Microsoft Access.png
2019-01-22 22_00_28-Microsoft Access.png (12.71 KiB) Viewed 7049 times
shaight
Posts: 2
Joined: Tue Nov 20, 2018 9:54 pm
Company: Tesla Inc.

Re: Arbitrary Direction Code

Post by shaight »

Thanks Dirk,

This application would be for a sensor that is measuring in a specific angle relative to a longitudinal/lateral. For example, if an accelerometer is measuring 45 degrees off-axis of the longitudinal direction. In my opinion, it does have a specific direction, its just not in the directions of the options allowed.

Thanks again,

Sean
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: Arbitrary Direction Code

Post by derpmann »

decison of the TaskForce:
Change desription of code 0 from Without to undefined/other
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Arbitrary Direction Code

Post by DiVe »

changed in the Database 1.6.2 proposal 3, 2019-04-10 16:06:00
Direction_0_decription.png
Direction_0_decription.png (17.4 KiB) Viewed 6894 times
User avatar
Admin
Site Admin
Posts: 69
Joined: Thu Jan 01, 1970 12:33 am

Re: Arbitrary Direction Code

Post by Admin »

Topic closed during NetMeeting 2019-07-17
Forum Admin
Locked

Return to “Additional codes”