New main location CTUN (control unit)

Suggestions for new codes
Locked
pfeiffge
Posts: 19
Joined: Thu Jun 17, 2010 9:18 am
Company: Dr. Ing. h.c. F. Porsche AG

New main location CTUN (control unit)

Post by pfeiffge »

Dear colleagues,
for rising number of control units in the vehicle I suggest to have a new main location for control unit(s) COUN.

kind regards
Gerd Pfeiffer (Porsche AG)
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: New main location CTUN (control unit)

Post by DiVe »

Dear Gerd,

I verified that the only Main Location currently available in the database, that might be similar is CEUN (Central Unit).
So COUN could be used to code additional controls systems.

Code: Select all

COUN - Control Unit - Steuergerät
Did you expect that it will be sufficient to code the location based on the Vehicle Zone (ISO[2]) and
the Fine Locations (ISO[7-8],ISO[9-10],ISO[11-12]) rather than the function of the control system parts?

Could you specify typical signals (physical dimenions) to be recorded on the Control Units?
I guess AC and may VO, CU,EV?

Kind regards,
Dirk
pfeiffge
Posts: 19
Joined: Thu Jun 17, 2010 9:18 am
Company: Dr. Ing. h.c. F. Porsche AG

Re: New main location CTUN (control unit)

Post by pfeiffge »

Dear Dirk,

I guess the position of the control unit is more obviously than a name coded in the main location. ( I fear a rising number of main locations). During analysis often it is more important to know the location of the sensor than the electronical function, when we are talking about accelerations. For us in a first step that will be sufficient. The dimensions could further be VO, CU or EV.

Kind regards Gerd
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: New main location CTUN (control unit)

Post by derpmann »

decision of the TaskForce:
new MainLocation CTUN
in combination with the Position.
User avatar
Admin
Site Admin
Posts: 69
Joined: Thu Jan 01, 1970 12:33 am

Re: New main location CTUN (control unit)

Post by Admin »

Closed during online meeting 2020-09-16
Forum Admin
Locked

Return to “Additional codes”