Proposal 20170106 - MME 1.6 Revision 2

Post Reply
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Proposal 20170106 - MME 1.6 Revision 2

Post by derpmann »

  • AIRB - including new MainLocations
  • WPL - more testobjects allowed
  • SEAT - no change to Revision 1
Attachments
ISO_AIRB_16R2_20170215.pdf
update with new comment on interaction airbag
(412.79 KiB) Downloaded 484 times
ISO_WPL_16R2_20150415.pdf
1 page
(249.89 KiB) Downloaded 543 times
ISO_AIRB_16R2_20161124.pdf
2 pages
(411.65 KiB) Downloaded 520 times
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: Proposal 20170106 - MME 1.6 Revision 2

Post by derpmann »

The Head Airbags mounted in the RoofFrame (ROFR) are listed in the possible codes section
on page 1 of ISO_AIRB_16R2_20170215.pdf as ??ROFR????AH and ??ROFR????GH.
But in the picture from the left side ?4ROFR was used.
This leads to the code ?4ROFR for the left and ?6ROFR for the right side.

In the meantime separate airbags for the front and the rear part of the passenger cab are developed.
To reflect this development and avoid ambiguities the code in the picture should be changed to ??ROFR.

Best regards
Peter
Attachments
ISO_AIRB_16R2_20180613.pdf
same content, date of page 2 corrected
(455.88 KiB) Downloaded 460 times
ISO_AIRB_16R2_20180613.pdf
update of the position of ROFR airbags in the picture
(443.9 KiB) Downloaded 421 times
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Proposal 20181122

Post by derpmann »

The positions of the Interaction Airbags are free.
This requires an update of the figure AIRB page 1.
ISO_AIRB_16R2_20181122.pdf
updated figure
(452.56 KiB) Downloaded 430 times
For the discussion please see:
https://www.iso-mme.org/forum/viewtopic.php?f=38&t=571
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: Proposal 20170106 - MME 1.6 Revision 2

Post by derpmann »

Figure SEAT updated from Rev1 to Rev2
and deleting some blank lines.
Attachments
ISO_SEAT_16R2_20190717.pdf
change of revision nr, date and blank lines on page 1
(814.66 KiB) Downloaded 343 times
Post Reply

Return to “Restraint systems and seats”