RED A (1.6) - Examples and Hints - Revision 2

Examples and Hints
Post Reply
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

RED A (1.6) - Examples and Hints - Revision 2

Post by derpmann »

Attached you´ll find the current working version of ISO TS 13499 RED A.

07.03.2016 - Changes to the ISO published version 1.6 Rev1 are marked in red color:
  • A.2.2.9 Test channel files - Polynomial calibration replaced by A.2.2.10 Test channel files - Transfer function
  • A.2.2.10 Test channel files - offset post test included into new A.2.2.10
  • A.2.2.11 Test channel files - Transducer damping ratio moved to new A.2.2.9
Best regards
Peter
ISO_TS13499_RED_A_V16Rev2_20160307.pdf
working version
(154.08 KiB) Downloaded 724 times
Last edited by derpmann on Thu Oct 29, 2020 8:35 am, edited 1 time in total.
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: RED A (1.6) - Examples and Hints - Revision 2

Post by derpmann »

As an additional change chapter A.2.15 has been updated
with the hint to the subdirectory ‚Equipment‘ for EQX data.
In this chapter the subdirectory names for busdata and simulation have to be renamed
from uppercase notation to ‚Busdata‘ resp. ‚Simulation‘.
_
ISO_TS13499_RED_A_V16Rev2_20191104.pdf
updated proposal with marked changes to Rev 1
(167 KiB) Downloaded 339 times
_
Best regards
Peter
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: RED A (1.6) - Examples and Hints - Revision 2

Post by derpmann »

the final version (black color) of RED A 1.6 Revision 2 is:
2020_06_17_ISO_TS13499_RED_A_1_6_2.pdf
(645.38 KiB) Downloaded 294 times
Post Reply

Return to “RED A (1.6.x)”