Attached a Zip-file with three EQX files and a quick description of what is contained.
Please feel free to post your feedback and possible challenges.
Example Datasets
Moderator: AK-ISO-MME
-
gieschef
- Posts: 12
- Joined: Thu Dec 16, 2010 2:04 pm
- Company: ZF Automotive Germany GmbH
- Location: ZF Automotive Germany GmbH Alfdorf/Germany
Example Datasets
- Attachments
-
- EQX_sampledata.zip
- (88.27 KiB) Downloaded 313 times
Re: Example Datasets
Can you help please with how to define a 3D IRTRACC with radius calibration using the v1.6 XSD ? The problem is I do not see any definition of the equation for when the units are "mm" only mV or LSB.
Attached is my formula for the IRTRACC Radius Cal ...
Thank you
Attached is my formula for the IRTRACC Radius Cal ...
Thank you
- Attachments
-
- IRTRACC Radius Cal Formula with coeffs.png (239.96 KiB) Viewed 1640 times
-
Oliver Schnaus
- Posts: 4
- Joined: Mon Sep 13, 2010 7:49 am
- Company: Kistler Instrumente GmbH
Re: Example Datasets
The Zero-Int [mm] can be divided by the Cal.factor [mm/V lin] to obtain the Zero-Int [V lin]. Multiply with 1000 to get it in [mV lin], which is required in Sensitivity3 of the EQX.
The sensitivity needs to be calculated from "mm/V lin" to "mV lin/mm" for the Sensitivity element of the EQX.
The sensitivity needs to be calculated from "mm/V lin" to "mV lin/mm" for the Sensitivity element of the EQX.