Example Datasets

This technical specification defines a data format to exchange data that is relevant for exchanging and using measurement equipment between calibration service providers, laboratories and requestors in vehicle safety testing.

You will find here additional documents for the usage and implementation of the standard (XSD, demo data).
The ISO TS 23520 base document is available via the ISO organisation.

Moderator: AK-ISO-MME

Post Reply
gieschef
Posts: 12
Joined: Thu Dec 16, 2010 2:04 pm
Company: ZF Automotive Germany GmbH
Location: ZF Automotive Germany GmbH Alfdorf/Germany

Example Datasets

Post by gieschef »

Attached a Zip-file with three EQX files and a quick description of what is contained.
Please feel free to post your feedback and possible challenges.
Attachments
EQX_sampledata.zip
(88.27 KiB) Downloaded 175 times
Kate
Posts: 1
Joined: Tue Nov 17, 2015 2:43 pm
Company: DTS

Re: Example Datasets

Post by Kate »

Can you help please with how to define a 3D IRTRACC with radius calibration using the v1.6 XSD ? The problem is I do not see any definition of the equation for when the units are "mm" only mV or LSB.

Attached is my formula for the IRTRACC Radius Cal ...

Thank you
Attachments
IRTRACC Radius Cal Formula with coeffs.png
IRTRACC Radius Cal Formula with coeffs.png (239.96 KiB) Viewed 405 times
Oliver Schnaus
Posts: 4
Joined: Mon Sep 13, 2010 7:49 am
Company: Kistler Instrumente GmbH

Re: Example Datasets

Post by Oliver Schnaus »

The Zero-Int [mm] can be divided by the Cal.factor [mm/V lin] to obtain the Zero-Int [V lin]. Multiply with 1000 to get it in [mV lin], which is required in Sensitivity3 of the EQX.
The sensitivity needs to be calculated from "mm/V lin" to "mV lin/mm" for the Sensitivity element of the EQX.
Post Reply

Return to “Documents and RED (XSD, demo data)”