Database 1.6 Rev 3 Proposal 1 (Snapshot 2024_04_18)

Access database files
Post Reply
DiVe
Posts: 420
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Database 1.6 Rev 3 Proposal 1 (Snapshot 2024_04_18)

Post by DiVe »

Dear all,

to have an intermediate state of the database and the RED B and C, please find here a WIP variant.
01_Version_163_p1_snapshot_2024_04_18.zip
(4.85 MiB) Downloaded 87 times
RED_B_163_p1_2024_04_18.pdf
(378.63 KiB) Downloaded 80 times
RED_C_163_p1_2024_04_18.pdf
(2.73 MiB) Downloaded 75 times
To use the database GUI you will need a 32 bit office.

The internal references to the code database and the figures in the GUI database do reference
the installation path:
„E:\Daten\MMEDB-Test\“

So, if you have the ability to use this location it will be simply to apply the GUI database.
Otherwise you will need to change the references in the GUI Database.
The code database should also be found via a relative path.
The figures path is relevant to generate RED C.

Kind regards,
Dirk
Last edited by DiVe on Fri Apr 19, 2024 11:17 am, edited 1 time in total.
DiVe
Posts: 420
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Database 1.6 Rev 3 Proposal 1 (Snapshot 2024_04_18)

Post by DiVe »

... some hints for configuring the figures path in the GUI database:
Enter the system dialog:
2024-04-19 13_12_17-ISO-MME Codification Manager.png
2024-04-19 13_12_17-ISO-MME Codification Manager.png (47.07 KiB) Viewed 390 times

change figures path:
2024-04-19 13_11_55-ISO-MME Codification Manager.png
2024-04-19 13_11_55-ISO-MME Codification Manager.png (13.97 KiB) Viewed 390 times
Post Reply

Return to “Database (1.6.x / 2.x)”