Dear all,
we should implement the temperature measurement location of ISO\TR 27957 in the Figures (Figure 5 for WS).
Actually we have implemented a "historic" location on the Thoracic Spine in this figure:
In the ISO 27957 the location is on the rear part of Rib 2:
In the NHTSA WorldSID qualification manual there is a requirement for a temperature measurement on the rib
for each fullbody test.
The ISO27957 is not directly referenced, but I suppose it is intended for the location.
We can code the location on the rib with side information or without:
A) ??TRRIRE02WSTE0? (just one measurement)
B) ??TRRILE02WSTE0?; ??TRRIRI02WSTE0? (two measurement or one with side position information)
How is the temperature measurement handled in the practice?
Typically only one measurement?
Measurement always on the instrumented side?
Please respect also the topic:
Position of Temperature Sensor: viewtopic.php?p=1234
Here the intention was to at least reference the ISO 27957 for all Dummy figures.
But we need to recode the location for WS and I expect also for several other dummies.
Kind regards,
Dirk
WorldSID (WS) - 2024???? revision
Jump to
- TS 13499 - the current release
- ↳ General (1.6.x)
- ↳ RED A (1.6.x)
- ↳ RED B (1.6.x / 2.x)
- ↳ RED C (1.6.x / 2.x)
- ↳ RED D (1.6.x / 2.x)
- ↳ RED E (1.6.x / 2.x)
- ↳ RED F (1.6.x / 2.x)
- ↳ Database (1.6.x / 2.x)
- ↳ Test Data (1.6.x)
- ↳ General (2.x)
- ↳ RED A (2.x)
- TS 13499 - Suggestions
- ↳ Corrections to existing codes
- ↳ Additional codes
- ↳ Clarification
- ↳ Last TaskForce meeting
- ↳ Next TaskForce meeting
- ↳ MME 2.0 discussion
- ↳ IR-TRACC discussion
- ↳ Movie Codes
- ↳ Naming Rules
- ↳ Vehicle Figures
- ↳ Vehicle surface and structure
- ↳ Restraint systems and seats
- ↳ Impactors
- ↳ Other Figures
- ↳ Dummy Figures
- ↳ Overview
- ↳ Chest Deflection Measurement
- ↳ Euro SID (E1, E2, ER)
- ↳ Hybrid III (H3, HF, HM)
- ↳ SID IIs (S2)
- ↳ Child Dummy Y-series (Y2, Y6, Y7, YA)
- ↳ Child Dummy Q-series (Q0, Q1, Q2, Q3, Q4, Q6, QA)
- ↳ WorldSID (WS, WF)
- ↳ BioRID (BR)
- ↳ THOR (TH, TF, T3)
- ↳ Codes for THOR dummy
- ↳ Codes for WorldSID
- ↳ Codes for ES-2re
- ↳ Codes for Advanced Lower Leg for Hybrid 3 dummies
- ↳ Dummy certification
- ↳ Testtypes, Subtypes and Regulations
- ↳ Active Safety Codes
- ↳ Dummy Positioning
- TS 13499 - Archive
- ↳ Release 1.5
- ↳ General (1.5)
- ↳ RED A (1.5)
- ↳ RED B (1.5)
- ↳ RED C (1.5)
- ↳ RED D (1.5)
- ↳ RED E (1.5)
- ↳ Test Data (1.5)
- ↳ Database (1.5)
- ↳ Release 1.4
- ↳ General (1.4)
- ↳ RED A (1.4)
- ↳ RED B (1.4)
- ↳ RED C (1.4)
- ↳ RED D (1.4)
- ↳ RED E (1.4)
- ↳ Test Data (1.4)
- ↳ Release 1.6
- ↳ General (1.6)
- ↳ RED A (1.6)
- ↳ RED B (1.6)
- ↳ RED C (1.6)
- ↳ RED D (1.6)
- ↳ RED E (1.6)
- ↳ Test Data (1.6)
- ↳ Database (1.6)
- TS 22240 - the current release
- ↳ Vehicle Safety Information Model - VSIM
- ↳ RED A
- ↳ RED B
- ↳ RED C
- ↳ Testdata
- TS 23520 - EQX - EQuipment eXchange
- ↳ Documents and RED (XSD, demo data)