EuroNCAP - Data acquisition and Injury Calculation

Suggestions for new codes
Post Reply
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

EuroNCAP - Data acquisition and Injury Calculation

Post by derpmann »

Dear colleagues,
EuroNCAP has published a draft version of a new technical bulletin for
Data format and Injury Calculation

This document starts with:
All test data needs to be provided in ISO-MME 1.6 or ISO-MME 2.0 format and needs to be fully compliant with the ISO/TS 13499 standard.
In chapter 1.2 channel names and filters are listed.
A colleague from AUDI found a specification for pedestrian head channels differing from the MME-Database for 1.6Rev1.

We should discuss this and possibly other differences as soon as possible to avoid differing requirements.

Best regards

Peter Derpmann-Hagenstroem
Attachments
Euro NCAP Data acquisition and Injury Calculation 20140815.pdf
Draft version of the technical bulletin
(719.77 KiB) Downloaded 810 times
DiVe
Posts: 431
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: EuroNCAP - Data acquisition and Injury Calculation

Post by DiVe »

Dear colleagues,
as we already started the discussion on the coding issues in the TB021, I have attached my reviewed version with several
questions regrading the coding and some other issues for the processing.
I have also send this document to the responsible person at EuroNCAP and hope we will get some response soon.

Kind regards,
Dirk
Euro NCAP Data acquisition and Injury Calculation 20140820_TB_021_Dive-Comments.pdf
Issues and Comments on the Draft TB021 document.
(698.03 KiB) Downloaded 753 times
derpmann
Posts: 460
Joined: Tue Apr 24, 2007 5:32 am
Location: Volkswagen AG, Wolfsburg - Germany

Re: EuroNCAP - Data acquisition and Injury Calculation

Post by derpmann »

Dear colleagues,
in the meantime the first official version of the TB021 is published.
Some of Dirks comments are integrated but some other topics have to be discussed.
Attached you will find the Version 1.0 document from October 2014 and a document with my comments.
They should be the base for the tomorrow's discussion.
Attachments
TB021_EuroNCAP_TechnicalBulletin_Comments_DPH.pdf
Comments to TB021
(31.56 KiB) Downloaded 1403 times
Euro NCAP Data-acquisition-and-Injury-Calculation-version-v1.0---TB021.pdf
Version 1.0 of the technical bulletin TB021
(605.33 KiB) Downloaded 817 times
DiVe
Posts: 431
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: EuroNCAP - Data acquisition and Injury Calculation

Post by DiVe »

Dear colleagues,

please find here the latest version V2.1 for TB021 from November 2017 with an application date of 2018.
There are no major changes to the 2.0. I found that in the annex
the "IR-TRACC" references was replaced by a more general "sensor" wording:
tb-021-data-acquisition-and-injury-calculation-v21.pdf
(847.28 KiB) Downloaded 721 times
Kind regards,
Dirk
DiVe
Posts: 431
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: EuroNCAP - Data acquisition and Injury Calculation

Post by DiVe »

Dear colleagues,

please find the latest version of TB021 included for review and discussion:
tb-021-data-acquisition-and-injury-calculation-v31.pdf
(649.34 KiB) Downloaded 671 times
Kind regards,
Dirk
Klaas
Posts: 22
Joined: Wed Jun 09, 2021 9:39 am
Company: measX

Re: EuroNCAP - Data acquisition and Injury Calculation

Post by Klaas »

Always keep open topic to keep up with checking EuroNCAP.
DiVe
Posts: 431
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

EuroNCAP - Data acquisition and Injury Calculation 4.0.2

Post by DiVe »

Please find here the latest release 4.0.2 for discussion:
Post Reply

Return to “Additional codes”