ISO Codes for RibEye™ Multi-point Deflection Measurement
Posted: Tue Aug 18, 2009 8:22 am
Hello to the members of the forum!
Has anybody already used the RibEye™ multi-point deflection measurement system from Boxboro Systems
(http://www.boxborosystems.com/products.html)
I would suggest to use the existing main locations and 'DS' for the dimension (e.g. 11RIBSRI01H3DSXP, ...).
For the S2 dummy some codes for the distance measurement already exist (e.g. 11TRRI01LES2DSYP, ...).
I would suggest to use the redundant indicators of the fine location 2 like L1, L3, L4, etc..
Or should we add new fine loactions to indicate the 'RibEye™' system?
Maybe it is also advisable to add the solution for the ISO codes to the possible channel list, so everybody knows which codes should be used with the RibEye™ system?
Has anybody already used the RibEye™ multi-point deflection measurement system from Boxboro Systems
(http://www.boxborosystems.com/products.html)
I would suggest to use the existing main locations and 'DS' for the dimension (e.g. 11RIBSRI01H3DSXP, ...).
For the S2 dummy some codes for the distance measurement already exist (e.g. 11TRRI01LES2DSYP, ...).
I would suggest to use the redundant indicators of the fine location 2 like L1, L3, L4, etc..
Or should we add new fine loactions to indicate the 'RibEye™' system?
Maybe it is also advisable to add the solution for the ISO codes to the possible channel list, so everybody knows which codes should be used with the RibEye™ system?