ISO-MME

Dear colleagues,
for the filmanalysis measurement and simulation of rollover tests we need two new MainLocations
which describe parts of the testrig environment:

• RAMP - ramp - part with variable heights or angles and orientations to turn the vehicle
  GRND - ground - surface/plane of the sand bed or embankment

For barrier tests we need to distinguish between the stable and the deformable parts of the test object:

• DEFO - deformable element - defo element mounted at a fixed or movable barrier

Best regards

Peter Derpmann-Hagenström

Discussed 2014-04-02: in principle, this is agreed, subject to a suitable figure.