ISO-MME

Posted: **Wed Apr 05, 2017 10:00 am**

Dear Colleagues,

we got information via Kees Waagmeester (Humanetics) that the coding for the Iliac load cell is missing.
Based on the manual for the QA, this is optional instrumentation, but there seems to be a ongoing activity for EuroNCAP
to measure the loads on the Iliac applied by the belt system and may to detect submarining.

I have added the correspondig codes to the database:

Code: Select all

??ILACLE00QAFOX?
??ILACLE00QAMOY?
??ILACRI00QAFOX?
??ILACRI00QAMOY?

In the ISO MME Task force meeting (2017-04-04) we have decided to add the requested codes to page 2 of the QA figure.
Also we desided to move the channels from the Sacrum-Iliac measurements from the first page to the second page.
I have prepared an update for the figure that also uses new (hopefully realistic) positions of the load cells:

: Update_QA-ILAC_2017_04_05.png (63.32 KiB) Viewed 9326 times

Any response will be welcome as always.

Bye,
Dirk

Posted: **Wed Apr 05, 2017 11:13 am**

The indication of the Iliac (or ASIS) load cells appears to be logic to me.
By aware that the ASIS load cells can be used on the Q6 dummy as well.
I send pictures from the Q6 and Q10 ASIS load cell integration to Dirk Vetter by mail.

Best regards,

Kees Waagmeester

Posted: **Wed Apr 05, 2017 1:14 pm**

Dear Colleagues,

with the permission of Kees, I can provide the pictures of the ILAC LC integration here:

: Q6 pelvis integration of ILAC LC; Q6-ILAC.png (160.43 KiB) Viewed 9320 times

: Q10 pelvis integration of ILAC LC; QA-ILAC.png (245.71 KiB) Viewed 9320 times

With the information given in the former post I will add the ILAC Codes also to Q6 now....

Bye,
Dirk

Posted: **Wed Sep 13, 2017 12:12 pm**

here is the corresponding figure.

ISO-MME

QA (Q10) Iliac Load Cell Codes

QA (Q10) Iliac Load Cell Codes

Re: QA (Q10) Iliac Load Cell Codes

Re: QA (Q10) Iliac Load Cell Codes

Re: QA (Q10) Iliac Load Cell Codes