Tilt Sensor for TH, T3 NECKUP

Suggestions for new codes
Locked
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Tilt Sensor for TH, T3 NECKUP

Post by DiVe »

Dear colleagues,

currently we have defined the following tilt sensors for the positioning of the THOR dummy:

??HEADPR00THAN X/Y ?
??THSPPR00THAN X/Y ?
??THSP12PRTHAN X/Y ?
??PELVPR00THAN X/Y ?

But there is one more tilt sensor needed for the THOR at the Neck Pitch change:
TH Tilt Sensors.png
TH Tilt Sensors.png (5.28 KiB) Viewed 4893 times
TH Neck Pitch Change Tilt Sensor.png
TH Neck Pitch Change Tilt Sensor.png (49.62 KiB) Viewed 4893 times
So I would propose to add:

??NECKPR00THAN X/Y ?

We also need to add in the current figure of the TH the THSPPR12 sensor.
TH_Figure.png
TH_Figure.png (23.84 KiB) Viewed 4893 times
Kind regards,
Dirk
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Tilt Sensor for TH, T3 NECKUP

Post by DiVe »

desision on the todays Task Force Meeting:

add the missing positioning sensor as:

??NECKPR00THAN X/Y ?

The TH/T3 figure will be prepared with all 5 tilt sensors and
as a first variant for the new locations/naming of the temperature sensors as in ISO 27957 for the next meeting.
2020-04-01 12_51_30-Window.png
2020-04-01 12_51_30-Window.png (126.29 KiB) Viewed 4886 times
see: viewtopic.php?f=38&t=589

Kind regards,
Dirk
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Tilt Sensor for TH, T3 NECKUP

Post by DiVe »

Dear colleagues,

I have implemented the new locations for the tilt sensors in the figures:
2020-09-16_T3_20200916_Page4.png
2020-09-16_T3_20200916_Page4.png (121.83 KiB) Viewed 4229 times

According to the manual the locations are:
2020-09-16_UM_THOR-50M_REV_E_TiltSensor_locations.png
2020-09-16_UM_THOR-50M_REV_E_TiltSensor_locations.png (104.31 KiB) Viewed 4229 times
The new locations of the temperature sensors are not included as we decided to await the complete rework of all figures after the new release 1.6.2.

Kind regards,
Dirk
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Tilt Sensor for TH, T3 NECKUP

Post by DiVe »

Dear Sebastian,

as you made the remark for the different naming style of the THSP12PR code,
I have verified the coding for the THSP12PR ANX,Y measurement:

This coding has been introduced for the TH (figure, database) in 2015:
2020-09-16 TH_THSPPR12.png
2020-09-16 TH_THSPPR12.png (8.03 KiB) Viewed 4219 times
And transfered to the T3 in 2018:
2020-09-16 T3_THSPPR12.png
2020-09-16 T3_THSPPR12.png (7.38 KiB) Viewed 4219 times
So, I suggest this coding is in use for a long time and should not be changed anymore.

In 2015 we also add the PR code for FL2:
2020-09-16_PR_on_FL2.png
2020-09-16_PR_on_FL2.png (7.5 KiB) Viewed 4219 times
Kind regards,
Dirk
User avatar
Admin
Site Admin
Posts: 69
Joined: Thu Jan 01, 1970 12:33 am

Re: Tilt Sensor for TH, T3 NECKUP

Post by Admin »

closed at on-lie meeting 2020-11-25
Forum Admin
Locked

Return to “Additional codes”