Coding of X-Sensor Jacket pressure measurements

Suggestions for new codes
Post Reply
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Coding of X-Sensor Jacket pressure measurements

Post by DiVe »

Dear Colleagues,

There is a request of channel coding of measurements coming from the X-Sensor device that is currently in use at IIHS:
Moderate Overlap 2.0 Test Protocol_ Version I - X-SensorJacket.png
Moderate Overlap 2.0 Test Protocol_ Version I - X-SensorJacket.png (949.88 KiB) Viewed 707 times
XSensor_IIHS_Annex.pdf
(491.61 KiB) Downloaded 90 times
(Annex A from IIHS Moderate Overlap 2.0 rating protocol)

Naming concept could be like load cell barrier in col x row in FL1+FL2, but without percentage, but simple increased numbering.
Origin and orientation of counting must the be defined.

Current points of investigation:
- which export formats are avaiable
- is the complete measurement for each sensor available over time available for export or only maximum values in a time range

Kind regards,
Dirk
DiVe
Posts: 411
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:

Re: Coding of X-Sensor Jacket pressure measurements

Post by DiVe »

After the ISO MME TF meeting (2024-02-14) I have added to the database 1.6.3p1 the following FL3 coding:
PressureMap_FL3.png
PressureMap_FL3.png (3.75 KiB) Viewed 64 times
Kind regards,
Dirk
Post Reply

Return to “Additional codes”