Missing temperature on BR figure
Posted: Wed May 27, 2026 10:00 am
I just realized that in the BioRID figure the temperature sensor code is missing:
Code might be THSP0000BRTE0.
Location should be best taken from:
ISO/DTR 27957 " Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations"
Is there a need to specify LE or RI in the code?
Other dummies will not reflect the side.
- 2026-05-27 11_31_13-BR_Static.png (43.97 KiB) Viewed 724 times
Location should be best taken from:
ISO/DTR 27957 " Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations"
- BioRID_Temp_Sensor_27957.png (320.74 KiB) Viewed 724 times
Other dummies will not reflect the side.