WorldSID RibEye Coding

[DiVe]

Dear all,
based on the NHTSA document for WorldSID Dummy Certification a new coding for the RibEye displacement has been introduced:

2024_01_Qualification Procedures_WS - DSL-Coding.png (59.14 KiB) Viewed 33 times

The RibEye manual gives the following details:

RibEye Software User Manual 7.0 - Length Change.png (113.73 KiB) Viewed 33 times

Do we agree to this coding our do we propose a different coding?
The direction "L" is an expired variant that was previously used for "Steering Column".

Kind regards,
Dirk

[DiVe]

Dear all,

the discussion in the task force at 2024_05_07 led to the following result:

• The projected change in length measurement in the XY Plane is similar to the DS0 measure of the MTRAC devices

• the coding should be changed from DSL to DS0

• The specific coding in the fine locations 01 an 02 is a good indicator that these DS0 readings are from a RibEye system

Example:

Code: Select all

old: D0SHRILEREWSDSLB  -> new: D0SHRILEREWSDS0B
according to the above extract from the WS RibEye Qualification Manual
old: D0TRRILUMIWSDSLB -> new: D0TRRILUMIWSDS0B
old: D0TRRILMMIWSDSLB -> new: D0TRRILMMIWSDS0B
old: D0TRRILLMIWSDSLB -> new: D0TRRILLMIWSDS0B

We will try to contact the RibEye manufacturer and finally also NHTSA to request this change in the documentation.