New Channelcodes for Simulation
Posted: Tue Apr 14, 2015 6:07 am
Dear colleagues,
in the CAE environment the MME Channelcodes will be used more and more.
The exchange between test and simulation systems in the future is based on the MME format.
In addition to the commonly used measurement locations for many simulations some special channels are required.
Most of this channels concern energies and are related to the complete system and not to single test objects.
They are needed for the validation of the simulation.
Proposed channel codes are:
in the CAE environment the MME Channelcodes will be used more and more.
The exchange between test and simulation systems in the future is based on the MME format.
In addition to the commonly used measurement locations for many simulations some special channels are required.
Most of this channels concern energies and are related to the complete system and not to single test objects.
They are needed for the validation of the simulation.
Proposed channel codes are:
Code: Select all
00EKIN000000EN0? Kinetic energy
00ETOT000000EN0? Total energy
00EINT000000EN0? Internal energy
00EHOU000000EN0? Hourglass energy
00EXWO000000EN0? Total external work
00ESLI000000EN0? Sliding interface energy
00MINC000000MA0? Mass increase
00DTIM000000TI0? Time step