Codes for Testrig Channels

Discussion about general rules for dummy, and other, calibration including:
1) coding for the specific or additional measurements at the dummies or the test rigs;
2) "Type of the test" and "Subtype of the test" descriptors to identify the calibration procedure used in a test.
Post Reply
DiVe
Posts: 431
Joined: Tue Apr 24, 2007 9:14 am
Company: IAT mbh
Location: IAT Berlin - Germany
Contact:
Contact DiVe

Codes for Testrig Channels

Post by DiVe »

Dear all,

a while ago we started an activity driven by several OEM's to provide a overview of
the coding for the measurements taken on the test rigs in dummy qualification procedures.

Based on the work of Darius Grabowski (VW Wolfsburg) there is a comprehensive summary
available that gives schematic figures of the test rigs and the coding that we propose.

The idea is to integrate these codes in a RED for reference and standardisation
of the exchange/delivery of data sets from dummy certification.

Please find here, with the permission of the author, the latest document:
20220228_Testrig_Isocodes_v1.020220617.xlsx
(1.62 MiB) Downloaded 80 times
If you find something to discuss or missing please report here.

Kind regards,
Dirk
Top
Post Reply

Return to “Dummy certification”