H3 2011-10-27 revision

Paul Wellicome · Post by **Paul Wellicome** » Thu Oct 27, 2011 4:39 pm

I have incorporated most of Dive's comments, modified in the light of this morning's discussion.

I have chosen to split the additional instrumentation page into two because it was too full for a single page.

I have not added the RibEye channels: I am unclear as to where the RibEye actually measures and whether it can be reconfigured to measure different things. It would help if I had one to look at, but MIRA doesn't have RibEye. I would propose having a separate page only for RibEye so it will not affect these pages. If someone can identify the position of hte measurments, I can draw a figure...

DiVe · Post by **DiVe** » Sun Oct 30, 2011 10:58 am

Hello Paul,
I managed to prepare comments on some of the figures.

So that might raise some need for a decision I would like to ask for the opinion of the other TF members?
Or should we collect all replies and have a small decision online session for the open issues?

ISO-H3_20111027_1_dive.pdf: (537.29 KiB) Downloaded 770 times

ISO-H3_20111027_4_dive.pdf: (525.7 KiB) Downloaded 763 times

Bye,
Dirk

DiVe · Post by **DiVe** » Mon Nov 28, 2011 10:43 am

Here is the manual for the ribeye-system....

50thMaleRibEyeModel7800BHWManual15Mar2010.pdf: (851.36 KiB) Downloaded 822 times

ISO-MME

H3 2011-10-27 revision

H3 2011-10-27 revision

Re: H3 2011-10-27 revision

Re: H3 2011-10-27 revision