New Channelcodes for Simulation

[derpmann]

Dear colleagues,
in the CAE environment the MME Channelcodes will be used more and more.
The exchange between test and simulation systems in the future is based on the MME format.
In addition to the commonly used measurement locations for many simulations some special channels are required.
Most of this channels concern energies and are related to the complete system and not to single test objects.
They are needed for the validation of the simulation.
Proposed channel codes are:

Code: Select all

00EKIN000000EN0?     Kinetic energy             
00ETOT000000EN0?     Total energy	           
00EINT000000EN0?     Internal energy            
00EHOU000000EN0?     Hourglass energy           
00EXWO000000EN0?     Total external work        
00ESLI000000EN0?     Sliding interface energy	
00MINC000000MA0?     Mass increase                
00DTIM000000TI0?     Time step                      

[DiVe]

Dear Colleagues,
the codes have been added to the current development database 1.6.2p1.

But I am not so lucky with the German naming.
Any suggestions welcome
--
Dirk

[derpmann]

Codes are integrated into the DB.
Item closed.